Case Studies

Inside CeMAT ASIA 2026: A Plastic Pallet Maker's Notes on Where Warehousing Is Heading

A Chinese plastic pallet maker walks CeMAT, PTC and ComVac in Shanghai — learning where warehousing is heading and what peers have launched.

Home » Blog » Inside CeMAT ASIA 2026: A Plastic Pallet Maker’s Notes on Where Warehousing Is Heading

From 3 to 6 November 2026, the Hannover Messe Shanghai (TIFN 2026) took place at the Shanghai New International Expo Centre, co-locating CeMAT ASIA (intralogistics), PTC ASIA (power transmission and control) and ComVac ASIA (industrial compressors). Every year at this time, Chenhuitong Plastic Industry sends a delegation along. This year was no exception — a team from management, export and production engineering spent four days walking halls W1 to W5.

Chenhuitong, as a new enterprise engaged in exporting plastic pallets, but the company has long held a simple belief: the biggest risk in manufacturing is not thin order books — it is becoming slow to notice the industry moving. So the team comes to the fair with two modest goals. First, to stand on the floor and get a feel for where logistics is right now, and where it is likely to head over the next three to five years. Second, to walk the stands of peers and upstream suppliers and see what new products, processes and specifications have appeared this year — anything worth learning from. No sales quota, no pre-booked meetings; just a pair of open eyes and a notebook.

It is easy for a manufacturer to assume its own catalogue is the whole world. Over the years Chenhuitong has deliberately taken the opposite approach: treat peers as teachers, treat trade fairs as classrooms, and face every shift in the industry with an open, learning mindset. What follows are the notes the team took while walking the floor.

What the racking halls showed us: pallets are becoming a system component

Pallet racking is one of the mainstays of the logistics halls. The clearest impression this year is that China’s leading racking makers are no longer selling racking alone — they are selling whole-warehouse packages: rack selection, aisle layout, column protection and after-sales support, engineered around a customer’s actual building dimensions. Several have opened plants in Southeast Asia and overseas, sitting closer to European and American customers. The stand of a long-established German warehouse-systems company took this even further, running from racking and conveyors to stacker cranes and an in-house WMS. Engineers there explained that, for large European tenders, pallets and racking are evaluated together; a dimensional tolerance table on its own is no longer enough.

The signal is clear: plastic pallets are moving from being a “standard part bought by dimension” to being a “component that has to be evaluated inside the whole warehouse system”. The delegation also noted a technical detail on the floor: in drive-in racking pallets sit directly on rails, so the underside must present two flat, continuous contact lines. A long continuous centre rib leaves a middle section floating, which creeps under long-duration storage — a condition that rarely shows up in routine load tests, yet decides whether a pallet can enter a customer’s drive-in or shuttle aisle at all.

What the automation halls showed us: as warehouses go unmanned, the pallet becomes the hidden bottleneck

The automation halls were among the busiest of the fair — AGVs, CTU case-handlers and pick-to-light systems on almost every stand. The team watched three full cycles at a Japanese-background electronic picking-label company’s live line combining pick-to-light, a CTU robot and conveyors. One detail stood out: when a tote or pallet base carried a warp of around 1.5 mm, the robot’s vision system spent roughly 0.8 seconds longer re-aligning. The engineer on the stand was candid — on e-commerce and 3PL automation projects, delays or below-spec cycle times are rarely caused by the robots. They come from upstream pallets and totes: an uneven base, an unreadable RFID tag, a jam on the roller conveyor. Once a warehouse goes live, the first supplier the customer rings back is often the pallet maker.

The wake-up call for the industry is that, in an automated warehouse, what decides whether a pallet is usable is no longer just the load rating, but three more fundamental properties:

What peers have launched, and what customers around the world are asking for

Beyond reading trends, the team also spent longer than usual at a few fellow plastic pallet producers’ stands, to see what new products had appeared this year. One thing was obvious: Chinese pallet makers are moving up the value chain. The talk is no longer about who can make the cheapest nine-feet pallet; the effort is now going into materials, structure and compliance.

New products on show this year were noticeably more concentrated:

Not every one of these products is something Chenhuitong should launch tomorrow, but each is a reminder that customer demand is shifting from “do you have this size?” to “can this pallet match my warehouse, my systems and my compliance requirements?” That is a conversation the R&D team will be taking back to Qingdao.

A few words with peers’ export managers between stands often surfaces the most candid market signals. Putting these conversations together, a few regional shifts are easy to make out:

Europe: sustainability compliance is becoming the ticket to entry

Several large grocery customers in Germany and the Nordics will, from next year’s tender season, require a minimum PCR (post-consumer recycled) content of 30% in plastic pallets, backed by a third-party mass-balance certificate. The EU CSRD is pushing that requirement down the supply chain. At the same time, HDPE’s natural properties — no moisture absorption, no insect risk, inherent ISPM-15 exemption — have moved from a nice-to-have to a default expectation in food and pharma.

Europe: sustainability compliance is becoming the ticket to entry

Local injection moulders in Vietnam, Thailand, Indonesia and Malaysia have scaled up quickly, and the export price of a generic nine-feet pallet is now thin. Yet demand is growing for nestable pallets, label-slot pallets, and small-batch, multi-spec, fast-turnaround orders. Southeast Asian e-commerce and 3PL are growing quickly; they want a mix of SKUs matched to a warehouse project, not one container of one size.

Middle East, Africa and South Asia: heavy load and weather resistance first

Static load requirements in these markets commonly exceed six tonnes, and outdoor UV and weathering resistance matter a great deal. Buyers did start out price-led, but their focus on service life has clearly risen: a pallet bought once and kept for five years beats a cheap one that cracks in two. Heavy-duty, steel-reinforced, UV-stabilised pallets show higher repurchase rates than lightweight lines.

North America and developed East Asia: compliance and vertical segments

North America still runs predominantly on GMA dimensions, with explicit limits on base flatness and edge damage. Pharma adds packaging-compliance expectations, and electronics buyers ask for anti-static versions. Japanese and Korean customers order smaller volumes but hold suppliers to a very high bar on finish, labelling and consistency.

What the ancillary halls showed us: the green bar on manufacturing is rising

The delegation also spent time in the compressor and power-transmission halls, which look unrelated to pallets at first glance but sit on top of every injection plant’s infrastructure — compressed air and hydraulics.

Two-stage permanent-magnet VFD compressors, servo-hydraulic injection packages and energy-monitoring systems on show all point in one direction: factory energy use is becoming measurable and auditable. Combined with the questions European buyers were already asking about supplier carbon footprint in the logistics aisles, the team’s read is that plant energy data and unit-product carbon emissions will, before long, be reviewed alongside price. For an export-oriented plastics business, the energy retrofit is no longer just an internal cost-saving exercise — it is an unseen market-access threshold.

Staying in learning mode is simply how Chenhuitong works

Four days on the floor produced no rush of orders written on the spot, but a density of insight that a routine sales trip would not have yielded. For a company that treats staying agile and staying curious as part of day-to-day operations, the value of a trade fair is not measured in orders signed at the stand. It is measured in how much clearer the team comes away about where the industry is going, what customers care about, and what worthwhile new ideas peers have put on show.

In the plastic pallet export business, the real risk is not competition — it is closing the door and assuming the product is already good enough. Over the years Chenhuitong has kept what might be called a “student’s mindset”: every logistics fair, every visit to a peer, every customer email is treated as a chance to read the industry and learn from what others do well. Watching racking makers build whole-warehouse packages shows how Chinese equipment is going global. Watching automation vendors build unmanned warehouses shows what the future asks of a pallet. Walking peers’ new-product stands shows which specifications different markets are now buying. That willingness to keep learning and keep changing with the industry is, in the end, what keeps a manufacturer genuinely agile.

The fair ends, but the learning does not. Back in Qingdao, the team will go through these notes with R&D, production and export colleagues and work out which directions can be turned into new products and better service. Customers, peers and partners are always welcome to visit the plant — the next productivity gains in warehousing will come from the whole chain moving together, not from any single company acting alone.

Qingdao Chenhuitong Plastic Industry Co., Ltd.

November 2026 · Qingdao, China

Get Started Today

Ready to optimize your material
handling?

Tell us about your requirements and our engineering team will deliver a custom quote
with product recommendations within 24 hours.