Case Studies

A case study in plastic pallets for food and beverage shuttle racking

How a nutrition warehouse used one HDPE pallet design for shuttle and push-back racking, with fewer pallet jams and less moisture damage to cartons.

Home » Food & Beverage » A case study in plastic pallets for food and beverage shuttle racking

Project overview

A food and beverage manufacturer in Chuzhou, Anhui, needed more pallet positions without extending its warehouse. The project combined high-density radio shuttle racking with reinforced HDPE plastic pallets, selected to suit the shuttle and its support rails.

The project account reports a 60–80% increase in storage capacity following the combined warehouse conversion. Consistent pallet dimensions, washable surfaces and on-site trials were central to making the new arrangement work.

Problems with the previous arrangement

The pallet specification and commissioning

Heavy duty plastic pallets matched to the system

The specified pallet was a 1200 × 1000 mm, three-runner, open-deck design made from virgin HDPE, described as food-grade in the project account. Galvanised steel reinforcement was incorporated to limit deflection under sustained loads.

Specification Project information
Footprint
1200 × 1000 mm
Material
100% virgin HDPE
Deck and base
Open deck with three runners
Entry
Four-way fork entry
Reinforcement
Internal galvanised steel tubes
Dynamic load rating
1500 kg
Static load rating
6000 kg
Racking load rating
1500 kg
Dimensional tolerance
±2 mm as stated in the project specification
Identification
Pallet numbering and provision for RFID

These are the project’s stated ratings, not interchangeable working limits. The permitted load in another installation depends on the support arrangement, load distribution, temperature and storage duration. The 1500 kg racking figure needs to be checked against the actual shuttle rails and duty cycle.

Reported results and lessons for buyers

What changed after installation

Because the installation dates from 2020, the upper end of the 5–8 year service-life range cannot be treated as eight years of observed use as of November 2026.

Hygiene and end of life

The pallets were selected for carton-packed goods. A food-grade resin description does not, by itself, establish the finished pallet’s suitability for direct food contact or certify a warehouse against GMP or HACCP requirements. Cleaning procedures, inspections and site controls remain part of the operation.

For buyers specifying recyclable plastic pallets, the practical question is how a worn pallet will be collected and processed. Confirm that the recycler accepts the HDPE grade and can separate the steel reinforcement. Recyclability does not mean that a local collection route is automatically available.

Discuss a similar project with Chenhuitong

As a plastic pallet manufacturer, Qingdao Chenhuitong Plastics can use the operating requirements as the starting point for a pallet discussion. This case highlights the value of checking the pallet against the storage equipment before placing a volume order.

For a comparable project, send your pallet footprint, maximum unit load, rail or beam drawings, operating temperature, cleaning method and expected order quantity. Ask for a proposed specification and sample trial covering the actual support conditions.

A pallet for shuttle racking needs to do more than carry the weight: it must fit the rails, remain serviceable through repeated handling and allow the warehouse team to inspect and clean it.

Get Started Today

Ready to optimize your material
handling?

Tell us about your requirements and our engineering team will deliver a custom quote
with product recommendations within 24 hours.